Vibro driving: the next chapter in offshore wind June 5, 2020 In the search for alternative ways to make foundation installations quieter, faster and easier, the offshore vibro driving technology has developed in leaps and bounds over the past 20 years.
Drive and extract a 6.5 meter diameter monopile October 28, 2019 In 2019, a CAPE VLT-320 Tandem was used to drive and extract a 6.5 meter diameter monopile on the Hollandse Kust Zuid Offshore Wind Farm.
20 monopiles for the Formosa 1 OWF October 15, 2019 In 2019, the CAPE VLT-320 Triple was used to install 20 tapered monopiles with diameters up to 8.4 meter for the Formosa I OWF.
3 pin piles for Soft Yoke Mooring System September 20, 2019 In 2019, the CAPE VLT-320 was used to upend and install three 96 inch pin piles with a length of 45 meter at a water depth of 20 meter.
9 subsea jacket piles in Gulf of Mexico August 13, 2019 In 2019, the CAPE VLT-320 was used to upend and install nine 64 inch jacket piles with a length of over 100 meter at a water depth of 60 meter.
4 pin piles for seabed structure June 10, 2019 In 2019, the CAPE VLT-80 was used to upend and install four 60 inch diameter pin piles with a length of 18 meter and weighing 22 tonnes.
6 anchor piles for FPSO Mooring system November 14, 2018 In 2018, the CAPE VLT-80 was used to upend and install six 60 inch diameter anchor piles with a length of 30 meter, in a waterdepth of 26 meter.
4 through leg pin piles for a wellhead platform October 17, 2018 In 2018, the CAPE VLT-80 was used to upend and install four 1,829mm diameter through leg jacket piles in a waterdepth of 32.5 meter.
Monopile installation on Amalia Offshore Wind Farm September 3, 2018 In 2018, the CAPE VLT-320 Tandem was used to upend and install a 4 meter diameter monopile with a slip joint at the Amalia Offshore Wind Farm.
Free hanging monopile installation test August 7, 2018 In 2018, the CAPE VLT-320 Tandem was used to upend and install a 6.5 meter diameter monopile at the Maasvlakte 2 in Rotterdam, the Netherlands.